High End Systems StudioPix Pixelation Luminaire - Manual (Page 36)

CHAPTER 3
The Menu System
22 StudioPix™ Pixelation Luminaire User Manual
Viewing DMX Data for the Link (DATA)
This procedure allows you to use a StudioPix fixture to view DMX channel values all devices on
the DMX link. Use this menu option to:
• Checking current DMX values on this fixture
• Test devices that do not have built-in DMX diagnostics
• Check fixtures that are physically inconvenient to monitor directly
If you experience a problem with a device on the link, use this menu to select a DMX channel in
the device’s channel range and view its DMX value. After noting the value of the channel you
selected, use your DMX console to change that channel’s value.
If the value of the DMX channel you selected does not change, there may be a problem with the
DMX cable or your transmitting device (i.e. DMX console).
If the DMX channel value changes, but the device does not respond, the device may be faulty.
Consult the documentation provided with that device for more information.
To view DMX data for another device on the DMX link:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the dMX menu. Press <Enter> to select.
4. Scroll to the desired DMX channel (001 – 512). Channel numbers will flash.
5. Press <Enter> The DMX value for the selected channel will be displayed.
Viewing the Unique Fixture ID (UNIQ)
To view the fixture’s identification number:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the UNIQ option.
4. Press <Enter>. The LED will display the fixture’s unique ID number.