High End Systems StudioPix Pixelation Luminaire - Manual (Page 45)

CHAPTER 4
DMX Programming Basics and Quick Start
StudioPix™ Pixelation Luminaire User Manual 31
Enhanced Mode
• 1 SHOWPIX or StudioPix Standard
• 2 SHOWPIX or StudioPix Image
• 127 generic RGB LED for SHOWPIX fixtures or 61 generic RGB LED for StudioPix fixtures
DMX Output Displays
Although all lighting consoles output the same 512 DMX channels per universe, the on-screen
labeling often differs. Parameter functions are displayed in either alpha-numeric descriptions
(strobe 1), percentage (0-100%) or decimal (0-255 for 8-bit and 0-65535 for 16-bit). Consult
your lighting console manual for further information.
Wholehog Programming Notes
Play Modes (Intensity)
Using the Image fixture type, press the Mode button to view the play mode options. By default
all modes trigger normally. If available per the SHOWPIX or StudioPix DMX protocol, you can
select “Media Trigger Intensity” to change to the Play Modes that trigger when Intensity is
greater than zero. When using one of these modes, the media will pause when the intensity is
at zero and plan when the intensity is greater than zero. To restore to normal triggering, select
“Media Trigger Normal”.
CMY
The Standard and Image fixture types both contain CMY controls for the Color Function modifier
channels. For some color function options, the CMY parameters will not adjust color, but will
adjust the color function per the SHOWPIX or StudioPix protocol.
The Wholehog libraries default to CMY mode for control of SHOWPIX or StudioPix. This allows
for use of standard color mixing, global palettes, and the color and gel pickers.
Custom Wheel Sets
You can import a custom preference file to your Wholehog show file to rearrange the wheelset
for easier accessibility to the parameters of SHOWPIX or StudioPix. The wheelset can be found
on Wholehog consoles in the Preferences folder or downloaded from:
http://www.flyingpig.com/support/hog3/downloads/library/index.shtml.