High End Systems StudioPix Pixelation Luminaire - Manual (Page 58)

CHAPTER 6
Color Control
44 StudioPix™ Pixelation Luminaire User Manual
Background Color
Default DMX Value = 0: no Image Layer background color
You may have a situation when applying certain layer effects, when only a portion of the LED
array is covered by the image. For example you may scale down the image or move it’s position
in the x or y direction. In this case you will see any image defined in a layer behind it or if that
layer is transparent or not defined, any global background color you have selected.
The Background Color parameter allows you to set a color for all of the LEDs that are off in the
image layer. This background color will block the view of a second layer or a global background
color effect. You can select one of the 256 available colors by choosing a DMX value from 1-255.
The illustration and table below show the color palette and DMX values for some sample colors.
DMX 1 2 3 40 90 125 170 200 255
Color Black White Blue Cyan Green Yellow Red Magenta Blue
0 255 Color Palette Range