High End Systems StudioPix Pixelation Luminaire - Manual (Page 64)

CHAPTER 8
Global Control: Transitions
50 StudioPix™ Pixelation Luminaire User Manual
When the global Transition channel has a DMX value = 0, Image A is visible at full intensity.
When the Transition channel is at a DMX value = 255 (100%), only Image B is visible. As the
DMX value of the Transition channel is increased from 0% to 100%, the layer intensities change
and color mix from Image A to Image B in a smooth fade.
Fade Through Black
Transition Mode DMX value = 69
Fade Through Black is another opacity transition. In this case, the intensity of Image A
decreases to black and then Image B intensity increases from black to full. When the global
Transition channel has a DMX value = 0 -127% only Image A is visible. At DMX values from 128
- 255 (100%), only Image B is visible.
Image A intensity decreases from full at a DMX value of 0% to a minimum intensity at a DMX
value of 126 (49%). The image will be solid black at a DMX value of 127 (50%). Values above
the midpoint increase Image B intensity from minimum at a DMX value of 128 to full intensity at
a DMX value of 255 (100%).
Image A Layer Image B Layer
Transition Mode DMX = 0
Transition DMX = 0
Transition Mode DMX = 0
Transition DMX = 128
Transition Mode DMX = 0
Transition DMX = 255
Image A Layer Image B Layer
Transition Mode DMX = 0
Transition DMX = 0
Transition Mode DMX = 0
Transition DMX = 128
Transition Mode DMX = 0
Transition DMX = 255