Honeywell COMMERCIALPRO TB7220 - Manual (Page 12)

TB7220 COMMERCIALPRO™ PROGRAMMABLE THERMOSTAT
63-2635—03 12
Fig. 30. Setting calendar when thermostat is first powered.
Fig. 31. Setting time when thermostat is first powered.
INSTALLER SETUP
Advanced Settings
The thermostat has advanced settings to match the HVAC
system. These settings can be adjusted to match specific
needs.
There are two different groups of settings:
— A complete set designed for the installation use.
— A simple set to limit accessibility for typical users.
Installer Settings (Complete Set)
Access to the installer settings is obtained as follows:
1. From the main screen, press SYSTEM. Five blank touch
keys show on the bottom of the screen between DONE
and CANCEL.
2. Press and hold the two blank keys on either side of the
center blank key for approximately five seconds. (See
Fig. 32.)
3. The Setup Number displays to the lower-left area of the
screen. It is a four-digit code beginning with zero. The
current setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 32. Entering Installer Setup.
User Settings (Simple Set)
Access to the user settings is obtained as follows:
1. From the main screen, press SYSTEM. Five blank touch
keys show on the bottom of the screen between DONE
and CANCEL.
2. Press and hold the center blank key approximately five
seconds.
3. The Setup Number displays to the lower-left area of the
screen. It is a four-digit code beginning with zero. The
current setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 33. Entering User Setup.
M22302
MONTH YEAR DAY
GO BACK BUTTON
GOES BACK TO LAST SETTING
NEXT BUTTON
ADVANCE TO NEXT SETTING
DONE
BUTTON
ADVANCES
TO TIME
SETTING
SCREEN
UP AND DOWN
BUTTONS
CHANGES
MONTH,
DAY AND
YEAR
DeSelect Day
System & Fan
FanUseEdit
Schedule
View
Clock & More
Tue
DONE BUTTON
ADVANCES TO HOME SCREEN
UP AND DOWN BUTTONS
CHANGES TIME
M22303
View
Clock & More
System & Fan Schedule Clock & More
Fan Auto
Tue
System Auto
Heat Off Cool
Set To
M22304
System & Fan
Fan UseEdit
Cancel Done
Fan Auto System Auto
Em Heat Off Cool
M22305