5 channel menu, 1 diagnostics sub-menu, Relay 1 menu item – Honeywell SC1000 User Manual
Page 127: Relay 2 menu item, Relay 3 menu item, Relay 4 menu item
SC Series Instruction Manual page 127
Re
la
y O
utp
ut Ch
annel
13
13.5 Channel Menu
The Relay Output channel’s SETUP menu allows you to manually turn the relays
on and off to verify that they are functioning. To change the operation of the limits,
see “Limit Menus” on page 55.
Detailed instructions on operating the instrument in the SETUP Menu mode can
be found in “SETUP Menu mode” on page 23. A diagram of all menus is located
in “Setup Menu Reference” on page 157.
13.5.1
DIAGNOSTICS
Sub-Menu
RELAY 1
Menu Item
The options for this menu item are:
•
“
ON
” will turn the relay on.
•
“
OFF
” will turn the relay off.
RELAY 2
Menu Item
The options for this menu item are:
•
“
ON
” will turn the relay on.
•
“
OFF
” will turn the relay off.
RELAY 3
Menu Item
The options for this menu item are:
•
“
ON
” will turn the relay on.
•
“
OFF
” will turn the relay off.
RELAY 4
Menu Item
The options for this menu item are:
•
“
ON
” will turn the relay on.
•
“
OFF
” will turn the relay off.