Chapter 5 system connector, 1 introduction, Chapter 5, “system connector”, cont – Honeywell SC1000 User Manual
Page 35
Advertising
SC Series Instruction Manual page 35
System Co
nnec
tor
5
Chapter 5
System Connector
5.1 Introduction
The 25-pin D-subminiature System connector is used for the following:
•
Communication by RS-232 or RS-485. RS-232 DCE standard designations
have been maintained.
•
Digital Function Inputs, such as for resetting tare, peak and latched limits
•
Open-collector digital Limit Outputs for limits 1 through 4 (not available on
Model SC1000).
Advertising