HONDA 08B21-SJC-102 User Manual
Page 12
12 of 17
AII 36587 (0705)
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
40. Route the rear camera harness along the tailgate
as shown.
41. Remove the TORX bolt from the tailgate hinge, and
attach the harness clamp bracket B to the
tailgate using the TORX bolt you just removed. Do
not tighten the TORX bolt at this time.
39. Install clear adhesive tapes to the tailgate:
•
Open the tailgate.
•
Get the clear adhesive tapes. Using scissors,
cut 30 mm from the end of each adhesive
tape.
•
Using isopropyl alcohol on a shop towel, clean
the tailgate where the adhesive tapes will
attach.
4N09043K
TAILGATE
REAR
30 mm
TAILGATE
LIP
TAILGATE
CLEAR
ADHESIVE
TAPE
CLEAR
ADHESIVE
TAPE
30 mm
FIRST
ADHESIVE
TAPE
SECOND
ADHESIVE TAPE
5D10010T
T50 TORX BOLT
(Do not tighten at this time.)
HARNESS CLAMP
BRACKET B
TAILGATE
HINGE
TAILGATE
4708092K
REAR
TAILGATE
REAR CAMERA
HARNESS
www.collegehillshonda.com