HONDA 08B21-SJC-102 - Manual (Page 14)

14 of 17
AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved.
51. Route the rear camera harness out through the
bed panel hole, and secure the rear camera
harness to the vehicle harness with one wire tie
just inside the panel hole.
52. Route the rear camera harness along the vehicle
harness towards the front of the vehicle, and
secure it to the vehicle harness with six wire ties
in the areas shown.
48. Secure the rear camera harness to the tailgate
with five wire ties with clip.
50. Route the rear camera harness through the left
side vehicle panel hole, and secure the rear
camera harness to the vehicle harness with two
wire ties.
49. Using isopropyl alcohol on a shop towel, clean the
tailgate where the cushion tape will attach. Using
scissors, cut one cushion tape in half. Secure the
rear camera harness to the tailgate with one half
cushion tape.
4708103K
5 WIRE TIES
WITH CLIP
TAILGATE
REAR
TAILGATE
REAR CAMERA
HARNESS
CUSHION TAPE
(Cut in half.)
5D10050T
WIRE TIES
VEHICLE
HARNESS
REAR CAMERA
HARNESS
LEFT SIDE
VEHICLE
PANEL HOLE
4709050K
WIRE
TIE
VEHICLE
HARNESS
FRONT
BED PANEL HOLE
REAR
CAMERA
HARNESS
LEFT SIDE
VEHICLE
PANEL
4709062K
VEHICLE
HARNESS
6 WIRE TIES
REAR CAMERA
HARNESS
www.collegehillshonda.com