HONDA 08B21-SJC-102 - Manual (Page 3)

© 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705)
3 of 17
3. Remove the fuel fill door release handle. Remove
the left front door sill trim (three clips and three
retaining tabs).
4. Remove the left rear door sill trim (three clips and
four retaining tabs).
5. Pull away the weatherstrip from the B-pillar lower
trim panel. Remove the left seat belt lower anchor
bolt cover and remove the lower anchor bolt.
Remove the left B-pillar lower trim panel by
pulling out toward you as shown.
• Seat belt anchor bolt torque:
30 to 35 N·m (22 to 25 lbs)
6. Remove the driver’s seat frame rear cover (two
clips and two hooks).
3916041T
RETAINING
TABS
RETAINING
TAB
LEFT FRONT
DOOR SILL TRIM
3 CLIPS
FRONT
FUEL FILL DOOR
RELEASE HANDLE
FRONT
RETAINIG
TABS
3 CLIPS
LEFT REAR
DOOR SILL TRIM
RETAINIG
TABS
4212450T
4713010K
DRIVER’S SEAT
2 HOOKS
DRIVER’S SEAT
FRAME REAR COVER
2 CLIPS
4212330T
FRONT
LEFT
B-PILLAR
LOWER
TRIM
PANEL
LEFT SEAT BELT
LOWER ANCHOR BOLT
WEATHERSTRIP
(Pull away.)
LOWER ANCHOR
BOLT COVER
www.collegehillshonda.com