HP RM500SL - Manual (Page 10)

0611 RM500SL User’s Guide Version 2.8 Page 10
2 Getting Started
2.1 Section overview
FastFacts 2.1: Getting started
2.2 Unpacking and connecting
FastFacts 2.2: Unpacking and connecting
This section provides help on unpacking the RM500SL and connecting various
components and accessories. Note that battery pills (SL-110), the RECD
transducer (SL-100), the barcode scanner (VA-120) and a microphone
extension cable (VA-130) are accessories for the RM500SL and must be ordered
separately.
The following topics are covered in this section:
2.2: Unpacking and connecting
2.3: Microphone connection
2.4: Microphone care
2.5: Battery pill use and care
2.6: Mouse, keyboard, barcode scanner
2.7: External printer, auxiliary audio outputs
1) Carefully unpack the RM500SL and check the contents of the shipping box
against the enclosed packing list. Note that some parts may be packed inside
the test chamber.
2) Unwrap the power cord from its stowage hooks - noting carefully how it has
been packed. To avoid serious damage to the display screen, always
repack the cord this way.
3) Connect the power cord to the socket next to the power switch on the right side
of the unit. Plug the other end into a grounded 100 – 240 volt power outlet.