HP RM500SL - Manual (Page 21)

0611 RM500SL User’s Guide Version 2.8 Page 21
4.3 Display settings
FastFacts 4.3: Display settings
4.4 Saving test setup
FastFacts 4.4: Saving test setup
This feature sets the screen saver timing and the background color used on the
graphic test displays. The screen saver blanks the screen after 60, 90 or 120
minutes of inactivity to prolong the life of the display.
To change display settings:
1) Press <Setup>, then highlight and <PICK> [Display].
2) To change the screen saver timing, highlight and <PICK> the current setting
3) Highlight and <PICK> the desired screen saver timing from the drop-down list.
4) To change the background color of the graphic display on the various test
screens, highlight and <PICK> [Color] to toggle between black and white.
5) Press <Continue> to exit setup.
This feature lets you retain the last-used stimulus type and level for most tests
when the power is turned off. It also lets you retain the last-used target method
and transducer type in Speechmap and Insertion Gain tests.
To enable/disable this feature:
1) Press <Setup>, then highlight and <PICK> [Test setup]
2) Highlight and <PICK> [Save test setup] to toggle between Yes and No.