Heartland Bakeware U109760-02 - Manual (Page 27)

Using your Range
27 U109760-02
Ask for a 15w 125-130v lamp, FOR OVENS. It
must be a special bulb, heat resistant to 300°C
(570°F).
Make sure the oven is cool. Open the oven door
and remove the Handyrack (if fitted) and oven
racks.
Turn off the power supply.
Unscrew the bulb cover by turning counter
clockwise. Unscrew the old bulb. Screw in the
new bulb, screw back the bulb cover. Turn on
the electricity supply and check that the bulb
now lights.
Cooktop ignition or cooktop burners faulty
Is the power on? Is the clock illuminated? If not
there maybe something wrong with the power
supply.
See ‘power supply’ section further on.
Are the sparker (ignition electrode) or burner
slots blocked by debris?
Is the burner trim correctly located?
Are the burner caps correctly located?
See the section entitled ‘Cleaning’
Remember that each cooktop burner has a
special safety device that stops the flow of gas
if the flame goes out. When lighting a cooktop
burner the safety device has to be overridden
by holding the control knob so that the gas can
flow. This allows the flame sensor to heat up
and operate the safety device. Keep holding
the knob pressed in to let the gas through to the
burner for few seconds. The igniter should spark
and light the gas.
If, when you let go of the control knob, the
burner goes out, the safety device has not held
in. Turn the control to the off position and wait
one minute, then try again this time holding in
the control knob for slightly longer.
Cooktop burners will not light
If only one or all the cooktop burners will not
light, make sure that the parts have been
replaced correctly after wiping or removing for
cleaning.
Check that there is not a problem with your gas
supply. You can do this by making sure that
other gas appliances you may have are working.
Do the burners spark when you push the
button? If not check the power is on - is the
clock illuminated?
Service and spares
Please complete the appliance details below
and keep them safe for future reference - this
information will enable us to accurately identify
your particular appliance and help us to help
you. Filling this in now will save you time and
inconvenience if you later have a problem with
your appliance. It may also be of benefit to keep
your purchase receipt with this leaflet. You may
be required to produce the receipt to validate a
warranty field visit.
Fuel Type:
Dual Fuel
Name of Appliance & Color*
Heartland Paragon
Appliance Serial Number *
Retailers Name & Address
Date of Purchase
Installers Name & Address
Date of Installation
* This information is on the appliance data
badge.
If you have a problem
In the unlikely event that you have a problem
with your appliance, please refer to the rest
of this booklet, especially the problem solving
section, first to check that you are using the
appliance correctly.
If you are still having difficulty, contact : -