Handspring Treo 300 - Manual (Page 172)

Section 6
164 Application-Specific Tasks
To set your remote cities:
1. Tap a pick list in the lower part of the CityTime screen and select the
city closest to the city you want to display.
Tip: If a nearby city isn’t in the list, you can use the Edit Cities command to
add a new city to the list. See the next section for details.
2. Tap the remaining pick lists and select the other three cities you want
to display.
Tip: You can temporarily display the day and time for any other city by
tapping the city’s location on the map display.
Adding cities
If the city you want to display is not in the predefined list, you can use the
Edit Cities command to add it.
To add a city to the list:
1. Press Menu .
2. Under Options , select Edit Cities (/E) .
3. Tap New .
4. Enter the city name and other information.
5. Hold Option and press Return to finish.
CityTime menus
CityTime menus are shown here for your reference, and CityTime
features that are not explained elsewhere in this guide are described here.
See page 28 for information about choosing menu commands.
Tap to select
a remote city