Handspring Treo 300 - Manual (Page 229)

Section 8
Advanced HotSync® Operations 221
H
o
tS
ync
O
pera
ti
ons
8
The COM port displayed on this screen is the port associated with your
infrared device. It should be different from the port currently defined for
cable synchronization.
5. Write down the port listed as “Providing application support” so you can
configure HotSync Manager for infrared communication.
This port is the simulated port. It is the channel through which the
actual infrared communication takes place between your computer and
your phone.
6. Deselect all other check boxes in the Options tab.
7. Click Apply and then click OK .
To enable infrared communication with Windows 2000:
1. Click the HotSync Manager icon in the Windows system tray
(bottom-right corner of the taskbar).
2. Choose Exit to close HotSync Manager.
3. In the Windows taskbar click Start , choose Settings , and then choose
Control Panel .
4. Double-click the Wireless Link icon.
5. Click the Image Transfer tab and deselect the Use Wireless Link to
transfer images from a digital camera to your computer check box.
Infrared
ports