Connection guide, Connecting the monitor, Video inputs and looping outputs – Honeywell HRDPX User Manual
Page 26: Connecting to a network, Connecting audio
Installation
______________________________________________________________________________________________
26
Connection Guide
Connecting the Monitor
There are three available monitor outputs on the Performance Series DVR.
•
Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
•
VGA output for VGA monitor – Mini-Sub D15
•
S-Video output - Mini-Din 4
Video Inputs and Looping Outputs
The HRDPX DVR comes with 16 BNC video inputs on the rear of its chassis.
Each video input has a corresponding looping BNC output beneath it for
passing the video signal to another monitoring/recording device.
Connecting to a Network
Use the RJ45 jack or RS232 port, if using a serial modem, on the rear of the
DVR when connecting to a network.
Connecting Audio
To record audio on the DVR connect the audio source to the connections on
the included 16 CH Audio Adapter cable.
To listen to live or recorded audio connect the Audio Out Port (Black) on the
adapter cable to an amplified speaker system.
Note
The DVR audio output is a line level source which requires an
amplified speaker system. The audio input can be from an amplified
source or directly from a microphone.
RJ45
RS232