Honeywell HRDPX - Manual (Page 48)

Setup
______________________________________________________________________________________________
48
Network
Network Configuration
Configure network settings.
DHCP Select – System gets IP address from DHCP server.
Clear – User must manually define a static IP address. Contact the
network administrator for this information.
HOST NAME – The DVR name.
IP ADDRESS – DHCP or Static. Contact your network administrator for this
information.
DDNS SERVER – The current DDNS server.
HOST NAME – Hostname for the DDNS server account.
USER – Username for the DDNS server account.
PASSWORD – Password for the DDNS server account.
ROUTER IP - When selected, Router IP reports your network’s external IP
address to the DDNS service. This is important if your router is running NAT
(Network Address Translation) services for your network.
If you are unsure of your network configuration Honeywell recommends this
feature be set to ON.
STATUS CHECK – Select STATUS CHECK to confirm the DDNS settings.
If Check returns SUCCESS, the settings are correct and DDNS is configured. If
Check returns FAIL, check to make sure the ID, PASSWORD and HOSTNAME
are correct, and then try again.