Overwrite, Check – Honeywell HRDPX User Manual
Page 33
Advertising
Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-04765 Rev A
33
06/09
Overwrite
Sets options for overwriting data when the Hard Disk Drive becomes full.
Enable HDD OVERWRITE to allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is full. If set to Off the DVR will
not record any new data once the HDD becomes full. (Default)
Enable DISK FULL WARNING for notification when the HDD becomes full and
HDD Overwrite is disabled.
Check
Checks the HDD for errors or failure.
Advertising