Honeywell HRDPX - Manual (Page 78)

Remote Software
______________________________________________________________________________________________
78
Audio Setup
Specify volume level and audio settings for recording according to preset
schedules and live or playback mode.
Audio Day - Enable/Disable
Audio Night - Enable/Disable
Audio Weekend - Enable/Disable
Audio Live - Enable/Disable
Audio Playback - Enable/Disable
Volume – 0 ~14
Motion / Event Input
Motion / Event Setup allows you to enable recording or relay response on
Motion, Sensor Event, and Video Loss
Motion
Enable– ON / OFF [Enable Event Input]
Sensitivity – 1~5 [Define Motion sensitivity level. 1=least sensitive]
Area – Red=selected, White=clear. Click to select/clear boxes.[Create or clear
the motion area on the camera]
Sensor
Sensor – ON / OFF [Enable recording on sensor event.]
Sensor Detail – All / 1~16 / All Channel [Associate sensors with channels.
Select the All check box to associate all sensors used to activate recording for
that channel; Select the All Channel check box to associate the selected
sensors with all channels.]
Video Loss
VideoLoss – ON / OFF [Enable event on video loss.]
Video Loss Detail - All / 1~16 / All Channel [Associate video loss “V” alert with
specific viewed channels. Select the All check box to prompt all channels with
video loss to provide a “V” alert to the viewed channel; Select the All Channel
check box to associate the selected channels to report a “V” alert when video
loss occurs.]