Action, Alarm monitor – Honeywell HRDPX User Manual
Page 47
Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-04765 Rev A
47
06/09
Action
CH – S Channels 1~8 / T Channels 9~16
Alarm – OFF / 1~4 [Associate an alarm relay with a channel].
Delay – 0~100 Seconds [Delay time before relay activates].
Duration – 0~100 Seconds [Time that the relay is active].
Preset – 0~100 [Enable PTZ camera to move to a preset position when an
event occurs. See PTZ Control for more information.]
Event Popup – ON / OFF [Displays channel associated with event].
Alarm Monitor
Send event information to a remote client using the Alarm Monitor software.
1.
Select EA SERVER ENABLE and press ENTER to select ON.
2.
Select the types of events to send to the Emergency Agent
(MOTION, SENSOR, MOTION + SENSOR.
3.
Enter the IP ADDRESS of the remote client.
4.
Enter the PORT number.