Handspring 90 - Manual (Page 136)

Page 136 Setting Preferences for Your Handheld
Entering a password
The Password box identifies the password you use to log into your server or ISP. Your entry in
this field determines whether your handheld prompts you to enter a password each time you log
into your network:
■ If you do not enter a password, your handheld displays the word “Prompt” in this field and asks
you to enter a password during the login procedure.
■ If you enter a password, your handheld displays the word “Assigned” in this field and does not
prompt you to enter a password during the login procedure.
Note: If you are concerned about security, select the Prompt option and do not enter a
password.
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
3. Hold Option and press Return to finish.
Note: The Password field updates to display the word “Assigned.”
Selecting a connection
The Connection Preferences settings tell your handheld about the hardware you are using for
remote data connections. For example, you can use a data-enabled mobile phone with an IR port
or a special cable to connect the phone to your handheld. See the section that begins on page
131 for details on how to configure Connection Preferences.
To select a connection:
1. Tap the Connection pick list.
The list displays the configurations in your Connection Preferences panel.
Enter password here
Tap here