Honeywell HRTL-One - Manual (Page 17)

Rev 1.00 6 Document 900.0259
10/04
Installation
P
8. Slide the carrier body back into the cartridge frame until it is fully inserted.
9. Push the handle towards the key lock (original carrier). Push the handle down to
secure the carrier in place (new carrier).
10. To ensure that the hard drive functions properly, turn the key lock clockwise to the
A position before powering the hard drive on.
New HD Carrier
Original HD Carrier
A
B
Status
segment Power
status Security status
A ON Locked (hard drive cannot be removed)
B OFF Unlocked (removable)