Recording video, System status reporting – Honeywell HRTL-One User Manual
Page 44
HRTL-One Digital Video Recorder User Guide
Rev 1.00
35
Document 900.0259
10/04
P
Recording Video
Your HRTL-One DVR offers a variety of flexible recording modes. You can configure it to:
•
Record all the time
•
Record for scheduled time periods
•
Record upon alarm activation
You can also configure record speed and resolution (quality).
The desired recording parameters are configured using the menu setup screens (see
). During normal (recording) operation, if power stops accidentally, after the
HRTL-One recovers power, it will continue to record after booting up.
Note
You an also record manually by pressing the REC button on the front panel.
Manual recording overrides timed recording.
System Status Reporting
System operational status is reported on the On-Screen Display (OSD).
The HRTL-One automatically detects:
•
The remaining hard drive capacity
•
A full hard drive
•
A system error
•
Loss of video signal from connected camera(s)
There are four record modes:
•
Alarm Record
•
External Trigger Record
•
Scheduling Timer Record
•
Manual Record
An alarm trigger causes the HRTL-One to immediately start recording at the recording
speed and quality configured for Alarm mode setup (see
).