HP WP36/50 - Manual (Page 21)

Chapter 2 Handling Paper
2-8
Insert the paper along the guides as far as it will go.
Figure 2-14
When loading paper into the MP tray, make sure that the
print side is facing upward. (The print side is the side facing
upward when the package is opened.) If the leading edge of
the paper is curled, straighten it out before loading the paper
in the MP tray.
When using the optional printer function, envelopes can be
set in the MP tray.
Do not print on envelopes wuth flap adhesive exposed. This
can cause printer malfunction.
Open the MP tray.
Figure 2-15
Align the insert guides with the envelope size.
Figure 2-16
Position the envelope against the insert guides with
the print side facing upward, and insert it as far as
it will go.
Figure 2-17
Incorrectly loading envelopes can result in printing in the
wrong orientation or on the wrong side.
IMPORTANT
4.3 Setting Envelopes
NOTE
3
1
2
NOTE
3