Kpdl (auto) emulation, Auto printing of kpdl error – HP WP36/50 User Manual
Page 44
Chapter 3 Using the Operator Panel
3-23
KPDL (AUTO) Emulation
KPDL is the Kyocera’s implementation of the PostScript lan-
guage. The KPDL (AUTO) emulation enables the printer to
automatically change the emulation mode according to the
data received when printing.
In addition to KPDL (AUTO) emulation, you can use the op-
erator panel to set another emulation mode that is used very
often. The default setting is PCL 6.
Press the MENU key.
Press the or key repeatedly until Emulation
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until KPDL (AUTO)
appears.
Press the ENTER key.
Press the key. When >
Alt.
Emulation
is dis-
played, press the or key. The names of alterna-
tive emulations appear.
PCL 6 (default)
KC-GL
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until the desired al-
ternative emulation appears.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Auto Printing of KPDL Error
The printer can be set to print error data during KPDL emula-
tion. If this is set to On, error data will be printed only when trou-
ble occurs during printing. The factory default setting is Off.
Press the MENU key.
Press the or key repeatedly until Emulation
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Select KPDL or KPDL (AUTO) using the or key.
Press the ENTER key.
Press the key. The message display changes to
that shown below. If >Print KPDL Errs is dis-
played when the KPDL (AUTO) emulation is select-
ed, press the or key to change it.
Press the ENTER key. A blinking question mark (?)
appears.
Select On using the or key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Emulation
PCL 6
Emulation
?PCL 6
Emulation
?KPDL (AUTO)
Alt. Emulation
?PCL 6
1
2
3
4
5
6
7
8
9
Emulation
PCL 6
Emulation
?PCL 6
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
?Off
>Print KPDL Errs
?On
10
1
2
3
4
5
6
7
8
9
10