Heartland Bakeware 3800-3820 - Manual (Page 18)

15
Lighting the Top Burners and
Grill
Cooktop is equipped with a spark ignition
system that is electrically operated. Pushing
in and turning the knob to any position will
light the burner. When the knob is turned, a
distinct clicking noise will be heard. After the
burner lights, the clicking noise will stop.
Note: When lighting any one burner, all
burners will spark, but only the burner
selected will light. All models feature “auto-
reignition” – should the flame go out for any
reason, the igniter automatically begins to spark
to re-ignite the burner. See “Reference” section
for manual lighting
procedure.
Propane Stoves: a slight pop or flash may
occur at the burner ports for a few seconds
after the burner has been turned off. This
“extinction pop” is normal for propane gas.
Note: Incorrect burner alignment will produce
a potentially dangerous flame and poor burner
performance. (refer to fig 11)
Burner and Grill Operation
Small Pot Ring / Trivet
Pot ring support is used when cooking on top
burners while using a small pot. The trivet fits
on any burner. Each channel fits on one of 4
fingers on the burner grate. (see fig 8 )
Dials
Grill - left dial
Burner - right dial
(fig 7)
(fig 8)
This channel fits on a finger
on the burner grate.