Heartland Bakeware 3800-3820 - Manual (Page 24)

21
If you still require help...
Contact your dealer and/or service techni-
cian. Should you still require help, see
the “Reference” section on how to contact
Heartland Appliances. If you still require help...
Contact your dealer and/or service techni-
cian. Should you still require help, see
the “Reference” section on how to contact
Heartland Appliances.
Power Failure Operation
Electricity to the cooktop only powers the auto
ignition. If electrical power is interrupted,
meals can still be cooked on the top burners of
your cooktop. Follow these simple directions
to manually light the burners.
Caution: Make sure your hands and clothing
are clear of the burner when lighting it!
Manually Lighting the Burners
1. Remove cast grate, for unobstructed
access to the burner head.
2. Hold a flame source to the outside burner
head. We recommend a barbecue lighter
as a flame source (see fig. 9)
3. Push in and turn the corresponding control
knob to the medium setting.
4. After the burner lights, adjust flame size as
required.
5. Carefully replace cast grate. Keep fingers
clear of the flame.
Manually Lighting the Grill
1. Remove porcelain grill.
2. Place a flame source (barbecue lighter)
through the mesh near the back of the grill
burner. Turn the back control to the
medium position (3).
3. Repeat this for the front grill burner.
Do not attempt to light front burner by
using the lit back burner.
Please note that the “auto reignition” feature
will not function without electricity.
Gas Trouble Shooting
If you smell gas:
Finding a gas leak is not a “do it yourself”
procedure. If you smell gas, turn off the
supply of gas to the range and call for service.
If you have other problems:
Before any component is replaced, follow this
four-step check list. Then consult “Gas
Trouble Shooting Chart” on the next page.
1. Be sure problem is not due to improper
operation.
2. Check basic adjustments – correct
pressure, dirt in the line, etc.
3. Ensure correct gas setting used. Setting
should be set for either propane or
natural gas.
4. If gas pressure and all adjustments seem
correct, use the following chart to help
identify the problem and/or malfunctioning
component.
If you still require help...
Contact your dealer and/or service techni-
cian. Should you still require help, see
the “Reference” section on how to contact
Heartland Appliances.