Heartland Bakeware 3800-3820 - Manual (Page 5)

2
Safety Instructions
Please check for any damage that may have
occurred during shipping. In the unlikely event
that you find any shipping damage, inform your
dealer immediately!
Legacy and Metro cooktops consist of the
cooktop body and the backguard.
Tools required for assembly:
•
Screwdriver Phillips/Robertson
• Utility knife
• Level
You must have a qualified electrician con-
nect the new range to be sure all electrical
codes and regulations are observed except
when range is equipped with a cord and plug.
A qualified gas technician must install this
appliance to ensure local installation codes
and regulations are observed.
Preparing the Installation Site
Find the appropriate clearance/installation
diagram for your cooktop on the following
pages. Diagrams include installations with an
exhaust hood.
These diagrams will outline the required opening
for your cooktop and clearances to cupboards,
electrical outlets, and gas outlet locations are also
illustrated. Site preparation can be made to have
these utilities ready prior to receipt of the
cooktop.
Caution: To avoid mishaps during the installation
phase, ensure power to receptacle and gas
valve are off.
Installation Clearances
Should the cooktop be installed adjacent to a
refrigerator, it is important that there be a
minimum of 5” (13 cm) of space between the
two appliances for proper air circulation.
Installation of cabinet storage space above the
surface burners should be avoided to eliminate
the risk of burns or fire by reaching over the
surface burners.
Your cooktop should be level for best cooking
results. To verify, place a carpenter’s level on
top of the cooking surface. If leveling is
required, shim under cooktop.
Installation and Assembly
See page 3 and 4 -for 30” Legacy
See page 5 and 6 -for 36” Legacy
See page 7 and 8 -for 30” Metro
See page 9 and 10 -for 36” Metro