HP 403349-003 - Manual (Page 31)

Removal and replacement procedures 31
4. Slide the metal AC transfer switch box back into the MCS unit on the sliding rails.
5. Complete the operation checklist (on page 111 ).
Air bleeder valve
The air bleeder valve is located inside the MCS unit, centered at the top of the unit.
The following tools are required for installation:
• T-25 Torx driver
• Pliers
• Water hose fitting wrench (included with your original MCS unit)
• Counter hold wrench (included with your original MCS unit)
Removing the air bleeder valve
1. Shut off the water flowing into the MCS unit. (" Shutting off the water " on page 25 )
2. Remove the top fan unit. (" Removing the fan unit " on page 51 )
3. Remove the top heat exchanger unit. (" Removing the heat exchanger unit with couplers " on page
59 )