HP StudioJet - Manual (Page 25)

27 Chapter 3: Operation
Control Center Menu Bar Features
File
Send Plot File Print a PLT or PLX file.
Download Firmware Allows the user to download the lat-
est firmware version for the printer.
See the section Downloading Firm-
ware in the Routine Maintenance
chapter for more information.
Exit Exit the Control Center.
Communications
Settings Select the COM port and baud rate
to match the printer.
Send Command Permits advanced users to manually
enter commands.
Automatic Buffer Creates an End of Frame command
Closing after a long communications delay.
By default this is set to On. Turn off
for MAC computers.
USB Info USB Info displays hardware and
driver information about the direct
USB connection.
Tools
Aux Sensor When checked, disables the Paper
Out sensor. The default is On. (The
Paper Out sensor is an option on the
printer.)
Cartridge Calibration Displays tools to adjust print
cartridge alignment. See Routine
Maintenance for more details.
Size Calibration Allows adjustment of the size cali-
bration settings. See Routine Main-
tenance for more details.
About Your FlexJet Displays the licensing status of the
machine.
FlexJet Licensing Displays the licensing status and
licensing updates.
Help
Contents Displays the Help file.
About Displays Control Center version
information.