Henny Penny PRESSURE FRYERS 600 - Manual (Page 56)

Model 500/600
SECTION 4. PROGRAMMING
The controls are preset from the factory, but desired functions can
be programmed in the field. This section includes programming
product times and set-points, and Special Programming, which are
the more detailed settings.
If “LOCK” shows in the display when trying to change the
set-points or times, the controls must be unlocked before making
changes. See Special Programming for unlocking procedures.
To Change Set-Point Temperatures
1. Press and hold until “PROG MODE” shows in
the display.
2. Press the desired product button and the LED above the
button is on and the set-point temperature flashes.
3. Press the to change the set-point temperature. Press and
hold and the values increases by 5.
4. Once the are released, the set-point is saved after 2
seconds.
5. To reset set-point temperature to default settings, press and hold
both simultaneously.
To change Product Cooking Times
1. Press and hold until “PROG MODE” shows in
the display.
2. Press the desired product button and the LED above the button
is on and the set-point temperature flashes.
3. Press and the cook time flashes.
4. Press the to change the product cooking time.
5. Once the are released, the time is saved after 2 seconds
6. To reset cooking time to default settings, press and hold both
simultaneously.
4-1. INTRODUCTION
4-2 TIME AND SET-POINT
PROGRAMMING
4-1 1207