Harbor Freight Tools METAL CUTTING BANDSAW 93762 - Manual (Page 13)

SKU 93762 For technical questions, please call 1-800-444-3353. Page 13
screw (190)
small vertical cutting plate (194)
Figure i
screw (190) vertical cutting plate (189)
2. Remove the two Screws (190), and
remove the Small Vertical Cutting
Plate (194). (see Figure i.)
Guide the Saw Blade (82) through 3.
the slot in the Vertical Cutting Plate
(189), and secure it in position with
the two Screws (190).
(see Figure i.)
heX head bolt (61)
vertical cutting
plate (189) screw (190)
Flat washer (192)
nut (193)
vertical cutting
plate support (191)
Figure j
4. Insert one Screw (190) downward
through the mounting hole in the
Vertical Cutting Plate (189). Attach
the top section of the Vertical Cutting
Plate Support (191) to the Vertical
Cutting Plate (189), using one Flat
Washer (192) and one Nut (193).
Remove the Hex Head Bolt (61).
Position the Vertical Cutting Plate
Support against the Body Frame (60).
Then firmly re-tighten the Hex Head
Bolt. (see Figures i and j.)