Hoya H01-201106 - Manual (Page 197)

195
Cha
n
gi
ng
A
ddi
tio
n
al
S
et
tings
8
You can select which function settings to save when the camera is turned
off. The following function settings can be saved.
1
Select [Memory] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Memory 1] screen appears.
2
Use the four-way controller (23)
to select an item, and use the
four-way controller (45) to
select O or P.
Turn the e-dial to display the [Memory 2]
screen.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Selecting Settings to Save in the Camera
(Memory)
Function Default Setting Function Default Setting
Flash Mode O Flash Exposure Comp. O
Drive Mode O Focus Position P
White Balance O Digital Filter P
Custom Image O HDR Capture P
Sensitivity O Playback Info Display O
EV Compensation O File No. O
O Settings are saved even when the camera is turned off.
P
Settings are cleared and returned to their default values
when the camera is turned off.
• Set [File No.] to O (On) to continue the sequential numbering for the file
name even if a new folder is created. Refer to “Selecting the File Number
Setting” (p.200) for details.
• When [Reset] (p.196) of the [R Set-up 3] menu is performed, all Memory
settings return to the default values.
Memory Memory
Flash Mode Flash Mode
Drive Mode
Drive Mode
White Balance
White Balance
Custom Image
Custom Image
Sensitivity
Sensitivity
EV Compensation
EV Compensation
Flash Exposure Comp.
Flash Exposure Comp.
MENU
1 2