Hoya H01-201106 - Manual (Page 235)

233
Ap
pe
n
d
ix
11
Not enough battery
power remaining to
update the firmware
Appears when trying to update the firmware if the
battery level is insufficient. Install a fully charged
battery, or use the AC adaptor kit K-AC115
(optional). (p.40)
Unable to update firmware.
There is a problem with the
firmware update file
Unable to update the firmware. The update file is
damaged. Try downloading the update file again.
(p.197)
Image folder cannot be
created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.198)
Unable to store image
The image could not be saved because of an SD
Memory Card error.
Settings not stored
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted images
and perform DPOF setting again. (p.165)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance (p.125) or use HDR Capture
(p.130). Try the operation again.
No more images can be
selected
You cannot select 100 or more images at a time
for Index (p.160) and Select & Delete (p.165).
No image can be processed
There are no images that can be processed
using Digital Filter (p.174) or RAW Development
(p.180) function.
This image cannot be
processed
Appears when you try to perform Resize (p.172),
Cropping (p.173), Digital Filter (p.174), Red-eye
Edit (p.179) or RAW Development (p.180) for
images captured with other cameras, or when
you try to perform Resize or Cropping for
minimum file size images.
The camera failed to create
an image
The creation of an index print image failed.
(p.160)
This function is not available
in the current mode
You are trying to set a function that is not
available when the capture mode is set to n
(Auto Picture),
H (Scene) or C (Movie) mode.
The camera will turn off
to prevent damage from
overheating
The camera will turn off because its internal
temperature gets too hot. Leave the camera
turned off until it has had time to cool down
before turning on the camera again.
Error Messages Description