Hoya H01-201106 - Manual (Page 77)

75
S
h
o
o
ting
F
unc
tion
s
4
Setting the Exposure
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to AUTO or within a sensitivity range equivalent
to ISO 125 to 6400 in increments of 1/3 EV. The default setting is AUTO.
1
Press the four-way controller (2) in Capture mode.
The Sensitivity setting screen appears.
2
Use the four-way controller (23)
to select [ISO AUTO] or [ISO].
3
Use the e-dial to change the sensitivity value.
4
Press the 4 button.
The camera is ready to take a picture.
Setting the Sensitivity
ISO AUTO
Sets the range to be
adjusted automatically.
ISO Sets the fixed value.
• When the capture mode is set to Z (Night Scene HDR)/l (Night Snap)/
p (HDR)/n (Stage Lighting) of H (Scene) mode, the sensitivity is fixed
to AUTO and cannot be changed.
• When the mode dial is set to a (Manual), [ISO AUTO] is not displayed. When
the sensitivity is set to AUTO and the mode dial is set to a, the sensitivity is
fixed to the last set value.
• The minimum sensitivity is ISO 250 when [Highlight Correction] (p.128) is set
to [On].
• Captured images may show more noise if a higher sensitivity is set. You can
change the setting in [High-ISO NR] of the [A Rec. Mode 2] menu. (p.85)
125 125
3200 3200
6400 6400
--
ISO ISO
Cancel Cancel OK OK OK MENU