Hoya H01-201106 - Manual (Page 204)

202
Cha
n
gi
ng
A
ddi
tio
n
al
S
et
tings
8
3
Use the four-way controller (23)
to select [Single Image] or [All
Images], and press the 4
button.
If you selected [All Images], proceed to
Step 5.
4
Use the e-dial to select an image
to set DPOF settings.
5
Use the four-way controller (23) to select the number of
copies.
You can set up to 99 copies.
K
appears at the top right of the screen for images with DPOF settings.
To cancel the DPOF settings, set the number of copies to [00].
6
Press the mc button to select O or P for printing the
date.
Repeat Steps 4 to 6 to make DPOF settings for other images (up to 999).
7
Press the 4 button.
The DPOF settings for the selected image is saved and the camera
returns to Playback mode.
O The date will be printed.
P The date will not be printed.
• Depending on the printer or printing equipment at the photo processing lab,
the date may not be printed on the pictures even if the date for DPOF setting
is set to O.
• The number of copies specified in the All Images setting applies to all the
images, and that specified in the Single Image setting is canceled. Before
printing, check that the specified number is correct.
All Images All Images
Single Image Single Image
MENU OK OK OK
Date Date
Copies Copies 00 00 Date Date
MENU
100-0001 100-0001
OK OK OK