Hoya H01-201106 - Manual (Page 86)

84
S
h
o
o
ting
F
unc
tion
s
4
Choose the part of the sensor to use for measuring brightness and
determining exposure. The following three methods are available.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [AE
Metering], and press the 4 button.
The [AE Metering] screen appears.
3
Use the four-way controller (45)
to select a metering method, and
press the 4 button.
The camera returns to the control panel.
Selecting the Metering Method
L
Multi-segment
metering
The sensor meters the brightness in 16 different zones.
(default setting)
Even in backlit locations, this mode automatically
determines what level of brightness is in which portion
and automatically adjusts exposure.
M
Center-weighted
metering
Metering is weighted at the center of the sensor.
The sensitivity increases at the center and no automatic
adjustment is performed even during backlit scenes.
N Spot metering
The brightness is measured only within a limited area at
the center of the sensor.
You can use this in combination with the AE Lock
function (p.82) when the subject is extremely small and a
correct exposure is difficult to obtain.
• You can also change the setting from the [A Rec. Mode 1] menu.
• In [2. Link AE to AF Point] (p.68) of the [A Custom Setting 1] menu, you can
link the exposure and AF point in the focusing area during multi-segment
metering.
AE Metering AE Metering
Multi-segment
Multi-segment
Cancel Cancel OK OK OK MENU