HP 240 Series - Manual (Page 16)

hp photosmart 240 series
chapter 1
12
7 Close the print cartridge door.
After you install a new print cartridge, a message appears on the printer’s
LCD screen asking you to load plain paper in the paper tray and press the
OK button. When you press the OK button, the printer automatically
calibrates the new print cartridge and prints a calibration page to confirm
that the print cartridge is installed correctly and functioning properly. For
more information, see calibrate the print cartridge on page 45.
remove the print cartridge
To remove the print cartridge:
1 Open the print cartridge door.
2 Push down and pull outward on the top of the print cartridge to unsnap it
from the print cartridge cradle.
3 Remove the print cartridge from the printer.
If there is ink in the print cartridge, place the cartridge in a print cartridge
protector for storage. If the print cartridge is empty, discard or recycle the
print cartridge. For information about recycling print cartridges, go to
www.hp.com/recycle.