HP 240 Series - Manual (Page 34)

hp photosmart 240 series
chapter 4
30
3 Press the S ELECT
P
HOTOS  button until the photo layout you want—one,
two, or four photos per page—is highlighted on the printer’s LCD screen.
Press the OK button.
The photo layout is a global setting—it applies to all photos you print from the
memory card. When you view a selected photo on the printer’s LCD screen, the
current photo layout is indicated by an icon in the bottom right corner of the LCD
screen.
Note: The changed photo layout will apply to all photos you print until you
choose a different photo layout from the printer menu or until you remove
the memory card from the printer. When the memory card is removed, the
photo layout returns to the printer’s default photo layout. For information
about setting the default photo layout, see default photo layout on page 36.
change the number of copies
When you print from a memory card, you can change the number of copies to
print of a selected photo to a number other than the default. For information
about changing the default number of copies, see default number of copies on
page 36.
1
Press the S
ELECT
P
HOTOS
 or  button to navigate to the photo for which
you want to change the number of copies. When the photo you want
appears on the printer’s LCD screen, press the OK button to select it.
2 Press the C
OPIES
+ or – button to change the number of copies to print of
the selected photo. When the correct number of copies is displayed on the
printer’s LCD screen, press the OK button. The changed number of copies
applies to the displayed photo only.
Note: You can set the number of copies to a different number for each
selected photo.
3 Press the P
RINT
button to begin printing.
Note: The changed number of copies setting will be discarded and the
number of copies to print will return to the default value when the photo is
deselected.