HP 240 Series - Manual (Page 45)

basics guide
set printer preferences
41
4 Select from the following options:
– Always if you want the printer to unmark the camera-selected photos
after printing.
– Never if you want the printer to leave the camera-selected photos
marked after printing.
– Ask if you want the printer to ask if you want to unmark the camera-
selected photos after printing.
5 With your selection highlighted on the printer’s LCD screen, press the OK
button.
revert to the factory default settings
If you made changes to the printer preferences, you can reset the printer to the
original factory default settings at any time by following these steps:
1
Press the M
ENU
button on the printer’s control panel.
2 Press the S
ELECT
P
HOTOS
 button until Preferences is highlighted on the
printer’s LCD screen. Press the OK button.
3 Press the S
ELECT
P
HOTOS
 button until Restore defaults is highlighted on
the printer’s LCD screen. Press the OK button.
4 Select from the following:
– Yes to revert to the original factory default settings for all printer
preferences.
– No to keep the current printer preferences.
Note: The printer’s LCD screen language and country/region settings will
not change if you revert to the factory default settings.
Preference Factory default setting
After printing Ask (whether photos should be deselected)
# of copies 1
Photo layout Ask (user to select photo layout)
Video print 9 per page
Add date/time Off
Borderless On
Exif printing On
Improve contrast On
Extend colors Off
Camera selections Ask (whether to unmark camera-selected photos after
printing)
Restore defaults no default setting
Language no default setting