HP 240 Series - Manual (Page 24)

hp photosmart 240 series
chapter 2
20
To select a photo in 9-up view mode:
1 Press the Z
OOM
– button to enter 9-up view mode. (In 9-up view mode,
nine photos appear on the printer’s LCD screen at a time.)
2 Use the arrows on the S
ELECT
P
HOTOS
button to navigate through the
photos.
Tip: To move quickly through the photos, press and hold the arrows on the
S ELECT P HOTOS button.
3 When the photo you want to select appears highlighted on the printer’s
LCD screen, press the OK button to select it.
A small printer icon appears in the bottom left corner of the photo on the
printer’s LCD screen to indicate that the photo has been selected.
4 To select additional photos to print, repeat steps 2 and 3.
Note: To exit 9-up view mode and return to viewing one photo at a time,
press the Z OOM + button.
Note: You cannot access the printer menu while you are viewing photos in
9-up view mode.
deselect a photo
• Press the S
ELECT
P
HOTOS
 or  button to display the photo you want to
deselect, then press the C ANCEL button.
• In 9-up view mode, use the arrows on the S
ELECT
P
HOTOS
button to
highlight the photo you want to deselect, then press the C ANCEL button.
The printer deselects the photo and discards any changes you made to that
photo’s print settings—number of copies, cropping, brightness, decorative
frame, or color effect.
Note: The global printer preferences described in set printer preferences on
page 35 are not affected when you deselect a photo.
deselect all photos
1 To deselect all selected photos, press the C ANCEL button one or more times
until a message appears on the printer’s LCD screen asking if you want to
deselect all photos.
2 Press the S
ELECT
P
HOTOS
 button to highlight Yes, then press the OK
button.
Note: Deselecting photos does not delete them from the memory card.