Heat & Glo Fireplace HEAT & GLO ESCAPE-I35-C - Manual (Page 34)

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev. K • 1/13 34
H. Install the Log Assembly
Log Set Assembly: LOGS-I30FB
Models: ESCAPE-I30-C, ESCAPE-I30FB
CAUTION: Logs are fragile, handle with care.
Figure 1. Log Set Installed
Figure 2. Reference Points
PILOT PILOT
BRACKET BRACKET
GRATE TINES GRATE TINES
BURNER LEDGE BURNER LEDGE BURNER LEDGE BURNER LEDGE
LIGHT TRAYS LIGHT TRAYS
SRV2201-702 SRV2201-702
SRV2201-704 SRV2201-704
SRV2201-703 SRV2201-703
SRV2201-701 SRV2201-701
SRV2201-705 SRV2201-705
SRV2201-706 SRV2201-706
LOG PINS LOG PINS
Log #1 (SRV2201-702): See Figure 2 for additional references. Position Log #1 as shown in Figure 3. Rest the left and
right ends of Log #1 on the burner ledge. The pilot bracket will support the center of the log.
Figure 3. Log #1
LOG RESTS ON LOG RESTS ON
PILOT BRACKET PILOT BRACKET
REST LOG ON REST LOG ON
BURNER LEDGE BURNER LEDGE
FLAT SPOT FOR LOG #5 FLAT SPOT FOR LOG #5
1 1
5 5
1 1
2 2
4 4 3 3
GRATE BAR GRATE BAR
1 1
2 2
3 3 4 4
5 5
6 6
6 6