Heat & Glo Fireplace HEAT & GLO ESCAPE-I35-C - Manual (Page 35)

35 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev. K • 1/13
Log #3 (SRV2201-704): See Figure 2 for additional details. Locate the log slot on the bottom right end of Log #3. Mate the
log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine.
Log #4 (SRV2201-705): See Figure 2 for additional details. Locate the log slot on the bottom left end of log #4. Mate the
log slot with the right log pin. Rotate the right end of the log clockwise, until it contacts the grate tine.
Figure 5. Log #3 Figure 6. Log #4
3
4
Log #2 (SRV2201-701): See Figure 2 for additional references. Position Log #2 as shown in Figure 4. Mate Log #2 with
the right corner of the burner as shown. Pull the log forward and to the left until it locks into position.
LOG CONTACTS LEFT LOG CONTACTS LEFT
GRATE TINE
GRATE TINE
LOG CONTACTS RIGHT LOG CONTACTS RIGHT
GRATE TINE
GRATE TINE
Figure 4. Log #2
LOG HANGS OVER LOG HANGS OVER
ONTO BURNER TOP
ONTO BURNER TOP
2
1
4
LOG CONTACTS RIGHT LOG CONTACTS RIGHT
GRATE TINE
GRATE TINE
FLAT SPOT FOR FLAT SPOT FOR
LOG #6 LOG #6