Harman Stove Company XL - Manual (Page 31)

Trouble Shooting
Look to see if a spark jumps
from the ignitor electrode to the
pilot when the ignitor button is
pushed.
Check igniter wire and
connections from piezo ignitor to
ignitor ceramic at pilot.
Reconnect or replace
Igniter wire.
Yes
No Bad
OK
OK
Bad
No
Yes
Turn on gas valve Is gas turned “on”?
Yes
OK
Purge gas line to stove
No
Replenish supply
Bad
OK
Replace Piezo Igniter
Check Piezo Igniter to make
sure the small wire on the
mounting flange is grounded.
Clean paint or rust from
around mounting hole.
Replace
Check pilot orifice and
pilot line for blockage.
Is there gas in tank (LP)
or line (NG)
Check Igniter Ceramic for
cracks
Pilot does not light
after many tries
31