HONDA Outboard Motor BF150A - Manual (Page 37)

35
Safety Inspection Maintenance Inspection
BEFORE OPERATION
Look around the outboard motor
for signs of oil or gasoline leaks.
Check the stern bracket to be sure
the outboard motor is securely
installed.
Wipe up any spills before starting
the engine.
Check that all controls are
operating properly.
Replace any damaged parts.
Check that the fuel hose is
undamaged and properly
connected.
Check that all fasteners are in
place and securely tightened.
Check the engine oil level (p. ).
Running the engine with a low oil
level can cause engine damage.
Check to be sure the propeller is
undamaged, and the castle nut is
secured with the cotter pin (p.
).
Check that the anodes are securely
attached to the gear case (p.
)
and are not excessively worn. The
anodes help to protect the outboard
motor from corrosion.
Make sure the tool kit is onboard
(p.
). Replace any missing items.
Check the fuel level in the fuel
tank (p.
).
Check the water separator for
water contamination (p.
).
Check that the battery fluid is
between the upper and lower levels,
and the battery leads are connected
securely.
61
78
77
56
70
75
05/02/22 14:30:48 31ZY6600_036