HONDA Outboard Motor BF150A - Manual (Page 48)

46
STOPPING THE ENGINE
Emergency Engine Stopping
OPERATION
PULL
SWITCH CLIP
LANYARD
LANYARD
PULL
SWITCH CLIP
EMERGENCY
STOP SWITCH
EMERGENCY STOP
SWITCH
CONTROL PANEL
Side-Mount Type
Panel-Mount/Top-Mount Types
TAKING CARE OF
UNEXPECTED PROBLEMS
During the warm-up period, check
the oil pressure indicator (p.
),
overheat indicator (p. ), and
cooling system indicator (p. ).
If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
on
p. .
To stop the engine in an emergency,
pull the clip out of the emergency
stop switch by pulling the lanyard.
We suggest that you stop the engine
this way occasionally to verify that
the emergency stop switch is
operating properly.
5.
32
34
33
93 97
05/02/22 14:32:21 31ZY6600_047