HONDA Outboard Motor BF150A User Manual
Page 45
43
Top-Mount Type
OPERATION
EMERGENCY STOP
SWITCH
SWITCH CLIP
LANYARD
TAKING CARE OF
UNEXPECTED PROBLEMS
If the engine is not properly
warmed-up bef ore raising the
engine speed, the buzzer and
overheat indicator may activate,
and the engine speed will be
automatically reduced.
The cooling system may f reeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may cause
engine damage.
Put the switch clip in the
emergency stop switch, and attach
the lanyard to your PFD (Personal
Flotation Device) or to your wrist,
as shown.
During the warm-up period, check
the oil pressure indicator (p.
),
overheat indicator (p.
), and
cooling system indicator (p.
).
If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
on
.
1.
5.
05/02/22 14:31:57 31ZY6600_044