HONDA Outboard Motor BF150A - Manual (Page 77)

Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
75
Water Separator Inspection and
Service
SERVICING YOUR OUTBOARD MOTOR
WATER SEPARATOR
FUEL TUBES
SUSPENSION STRAP
SEPARATOR
ASSEMBLY
The water separator is located below
the intake manifold. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized Honda outboard motor
dealer for cleaning.
Remove the engine cover (p. ).
Remove the separator assembly. If
it is difficult to remove the
separator assembly by your self,
consult an authorized Honda
marine dealer.
Remove the suspension strap from
the water separator bracket, then
remove the strap from the
separator assembly.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
Pinch the fuel tubes with tube clips
to prevent fuel leakage.
1.
2.
3.
60
05/02/22 14:36:42 31ZY6600_076