HONDA Outboard Motor BF150A - Manual (Page 67)

65
Lubrication Points
SERVICING YOUR OUTBOARD MOTOR
THROTTLE LINK/
PIVOT/PLATE THROTTLE ROD/LINK TILT BRACKET
TILT SHAFT
SWIVEL CASE
PTT THRUST RECEIVER
ENGINE COVER BRACKET
PROPELLER SHAFT
Apply anticorrosion oil to pivot
surf aces where grease cannot penetrate.
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover and any exposed metal
surfaces except the belts.
Apply marine anticorrosion grease to
the following parts:
Lubrication interval:
After the first 20 hours or 1 month, then
every 100 hours or 6 months. (Refer to
the maintenance schedule page
). 57
05/02/22 14:35:17 31ZY6600_066