HONDA Outboard Motor BF150A - Manual (Page 35)

33
Anodes Fuel Priming Bulb
CONTROLS AND FEATURES
ANODE
(each side) ANODE
(stern bracket)
PRIMING BULB
UP
OUTLET END
(motor)
INLET END (tank)
The anodes are made of a sacrificial
material that helps to protect the
outboard motor from corrosion.
There are two anodes on the gear
case, one on the stern bracket, and
two small anodes in the water
passages of the engine block.
A priming bulb is built into the fuel
hose that connects the fuel tank to the
outboard motor.
Before starting the engine, hold the
priming bulb up in the direction of
the arrow, then squeeze the priming
bulb until it feels firm. This will
ensure that fuel is supplied to the
engine (p.
). 37
05/02/22 14:30:27 31ZY6600_034